Wilmot Auto Repair

If someone tells you to put the brakes on something, you know it means stop.  And stopping is one of the most important safety maneuvers you can do in any vehicle.  That means your brakes have to work properly.  Let's face it.  You stop dozens of times every time you drive.  And over time, that takes its toll on your brakes.  Friction is what stops your vehicle.  Most newer vehicles have disc brakes, and the parts that wear out the fastest are those that rub against each other every time you stop, the rotors and the pads. The rotors are discs that rotate with the wheels, and the pads are removable surfaces that make contact with the rotors to slow or stop your vehicle.  Bits of both wear off each time you stop, and when enough of either (or both) lose too much material, your brakes become unable to safely slow or stop your vehicle.  The pads usually are the parts that wear out first.  Signs that your brakes might be getting worn are: Y ... read more

After months of postponing travel far away from home, a lot of us can't wait to hit the road and scream "Road Trip!" again.  But how long has it been since the vehicle you're planning on taking has had a thorough inspection? And is it roadworthy for several days on the highway? Time to schedule a professional trip inspection in our service center.  When it comes to long trips, before you go, make sure you can stop.  We can perform a break inspection.  Our technician will visually inspect your brakes for wear and how much life is left in the brake pads and rotors.  They'll also check your brake lines and fluids for fitness and fill. If it's going to be a long trip, it's important that your engine stays lubricated.  The technician will see when the last time you had an oil change, check the levels and inspect the system for leaks.  If you are close to needing an oil change, it's best to have it done before the trip because no one wants to interrupt a va ... read more

You know you have an accelerator pedal; step on it and your vehicle is supposed to go.  But did you know there is a part in your vehicle that keeps track of where the throttle is? It's called the Throttle Position Sensor, or TPS. The TPS is a sensor that helps your vehicle figure out the right mix of air and fuel is reaching your engine.  It does that by keeping track of the throttle and sending that information to your vehicle's computer.  Other factors play a role in how well your engine is performing, including air temperature, how fast the engine is turning over and air flow.  When the TPS isn't working right, you may find your vehicle won't accelerate or doesn't have the power you're expecting when you press on the accelerator.  In some cases, it may accelerate on its own.  Sometimes your vehicle won't go over a certain speed.  Your Check Engine light may go on. Any of these symptoms should be checked out soon.  If your TPS stops working rig ... read more

Cold weather can present some real challenges when it comes to your vehicle's windshield.  Think of it.  Your windshield is your window to the world when you're driving, and clear visibility is extraordinarily important for safe travels. So here are 3 tips to ensure that your windshield can do its job during the cold weather. Don't ever pour hot water on a frozen windshield.  Let's say you head outside and see your vehicle covered with ice. You think, hey, maybe I can heat up a pot of water on the stove and melt that off fast.  Don't do it!  You run the risk of shattering the glass the second that hot water hits the frigid glass.  Ditto for using a propane torch.  Glass does not do well with sudden temperature changes.  Instead, turn on your engine and start the defroster, which heats the windshield up gradually.  Use a plastic scraper designed for windshields (don't EVER use metal to scrape) and be patient.  Don't hammer on the ice to ... read more

You know how exposing your skin to sunlight can cause sunburn and other unhealthy things.  Sunlight can also create major problems for your headlights.  After they've been exposed to ultraviolet light, acrylic headlights can yellow and fog due to oxidation.  And when that happens, less light can pass through the plastic, reducing the effectiveness—and safety—of your headlights.  It's not just the UV light that causes headlights to turn cloudy.  Road grime and debris gets kicked up and can scratch the plastic, diffusing the light that should pass through them when they're clear.  Plus, when your vehicle was new from the factory, the headlights had watertight seals all around to prevent moisture from getting into them and fogging them up with water vapor.  Just like clouds can hide the sun, tiny water molecules can diffuse the light from your headlight bulbs.  Sure, you could buy replacement parts and start fresh.  But the good new ... read more