Wilmot Auto Repair

As the temperatures plunge, certain types of engine oil may not flow as easily as they did when it was warmer.  Makes sense, doesn't it? Just like molasses gets thicker as the temperature goes down, engine oil does the same thing. So, maybe you're wondering if you have to change your oil as the seasons change so it's just the right thickness to lubricate your engine parts.  How well engine oil flows is called its viscosity. There are different types of oil—some that have just one viscosity and others called "multigrade" oils.  Here's the difference. A single viscosity oil will flow better when it's hot but not as well when it's cold.  A multigrade oil is engineered so that its flow properties at cold temperatures are different than they are at warm temperatures.  In other words, a multigrade oil can start out in colder temperatures acting like a thinner oil and then behave like a thicker oil when it's warm.  That's a pretty cool trick and it's why mu ... read more

If you’ve noticed your vehicle is hard to start, stalling, or has lost power, the culprit may be a part with an odd name: the MAF sensor.  You may have never even heard of a MAF sensor, but it’s important that it be working correctly, or you may be experiencing some fairly significant engine issues. All vehicles bring in air and direct it through an air filter before it goes into your engine, where it mixes with fuel to provide power to get you going. There’s a tube-like device with a sensor inside it that measures how much of that mass of air is passing through. That’s why it’s called a mass air flow sensor, or MAF sensor.  If the MAF sensor isn’t working right, the engine’s computer can’t figure out the right amount of fuel to mix with it, and your engine may hesitate or stall.  Sometimes this will cause your Check Engine Light to come on, and any time it does that, make sure you have your vehicle checked by a professiona ... read more

Rust.  It's worse if you drive in places that use salt on the roads in winter, or if you spend time driving near a body of salt water.  But any vehicle has to deal with rust after years on the road.  And it's not just that rust can eat away your vehicle's body and fenders.  It can be a real problem around your suspension, drivetrain or any place where there's metal. Rust takes its time.  You don't see it until it's already done its dirty work.  It can wreak havoc with your electrical system.  Sure, vehicle manufacturers do their best to keep it to a minimum, but especially with road treatments like brine around, their task is a difficult one. The one spot everyone notices is in the paint.  You see a little bubbling under the once-smooth surface.  By the time it bubbles, it's well involved in rotting away that spot of your vehicle.  You wouldn't believe how just a little thing can start the process on its way.  A stone chips the pai ... read more

It's bad enough in cold weather when ice and snow block your visibility.  Add to that fog on the inside of your windows and you could be driving blind.  So here are a few tips on how to keep your windows from fogging up when there's a chill in the air. You probably know fog is really condensation, when moist, warm air meets a cold surface and turns to liquid.  If your windshield fogs up, you probably turn on your windshield defroster. Most defrosters blow heated air on the windshield glass to warm it up so it won't condense the moisture.  Many also turn on the air conditioning to reduce the moisture.  That same strategy can work on the rest of the windows.  First, turn up your heater's temperature setting.  The hotter the air, the more moisture it will hold.  Also, turn off the "recirculating" setting since you want all outside air to come in. Then switch on the air conditioning.  It will remove the moisture from the outside  air that i ... read more

If you notice your brakes aren’t working like they used to, that’s the kind of thing that’s important to have checked out soon.  That’s because your brakes are extraordinarily important to the safe operation of your vehicle.  Sometimes you feel like your brake pedal is feeling a little soft or it’s lower than usual. Or you might feel like the brakes are on all the time, holding you back. Maybe when you release the brake pedal, it comes back up more slowly than usual. There are a few different problems that can cause your brakes to feel like any of those things, so bring your vehicle in to us and we can inspect them. One possible cause of those brake issues is a damaged or worn-out brake hose.  Your hydraulic brakes work by carrying brake fluid to each of your wheels.  There are steel lines that carry the fluid most of the way, but because your wheels are moving all the time, a flexible hose is used to connect the steel lines and the bra ... read more

Ask just about any driver about one thing they fear seeing inside their vehicle and they'll say it's the Check Engine light coming on. You know, that little light on your instrument panel that is in the shape of a vehicle engine, often accompanied by the words Check, Check Engine, Check Engine Service, or Service Engine Soon. There are so many different reasons that light shows up, from something as simple as a loose gas cap to a more serious problem that requires immediate attention.  The Check Engine light comes on because a component of your vehicle's onboard diagnostics system is telling you something isn't operating normally. Your vehicle has a lot of sensors built in, all tied together by computers.  When the sensors are showing that things somewhere aren't functioning the way they should be, they alert the vehicle's diagnostic computers and tell you something's amiss. The simple rule is if the Check Engine light is on steadily, it's so ... read more

If you’ve ever stepped on your brake pedal and felt your vehicle vibrate, that’s a signal that you shouldn’t ignore.  A pulsating brake pedal is a sign that something is wrong.  Braking action should be smooth, sure, and quiet, not shaky and noisy. Most newer vehicles have disc brakes, called that because they have a round, flat disc connected to each wheel.  Those discs are the rotors. Other parts called brake pads are squeezed against those discs when you press on the brake pedal. Remember that vibration we mentioned? That can be caused by the rotor not having a straight, true surface. Rotors can heat up from friction and warp.  They can become thinner from constant wear.  Rotors can rust from the elements they’re exposed to, such as rain, snow ice, and salt.  They can get grooves in them from so many contacts with the pads.  The signs of worn rotors are vibrations, grooves on the rotor (which you can see sometimes through op ... read more

Ever wonder how all-wheel-drive or 4-wheel-drive vehicles get the power from the engine to the front and rear wheels? The magic happens in what's called a transfer case.  In some all-wheel-drive vehicles, it's sometime called a power take-off unit, or PTU. Inside the transfer case is a set of gears.  And to keep those gears meshing smoothly, they have to be lubricated and kept cool.  What does that is called transfer case fluid. Depending on your vehicle's type of transfer case, it is filled with either an automatic transmission fluid, a gear oil that's a bit thicker or transfer case fluid designed to be use for your transfer case. As happens with all lubricating fluids, the transfer case fluid has things in it that break down the older they get.  They have corrosion inhibitors, detergents and anti-foaming agents that keep the lubricant from getting air bubbles in it. Transfer cases don't have filters in them to clean out impurities. If you don't have your transfer ... read more

If you've ever felt your vehicle hesitate, go, then hesitate again, you might think there's something wrong with the transmission.  After all, it's not moving smoothly  down the road.  But there are plenty of malfunctions that can cause those symptoms, one of them being something you may have never heard of: the EGR valve. EGR stands for Exhaust Gas Recirculation. It's a system that channels small amounts of exhaust back into the engine to cool down the cylinders and reduce polluting gases.  Those include nitrogen oxides that can cause smog. The EGR valve regulates how much of the vehicle's exhaust gas is recirculated. After years and long distances traveled, that valve can get clogged or fail. Sometimes the EGR valve can stick open.  When the EGR valve isn't working properly, your vehicle can start releasing those nitrogen oxides and pollute the air. The symptoms of a malfunctioning EGR valve include: Engine losing power Engine idling roughly Pinging and knoc ... read more

If someone tells you to put the brakes on something, you know it means stop.  And stopping is one of the most important safety maneuvers you can do in any vehicle.  That means your brakes have to work properly.  Let's face it.  You stop dozens of times every time you drive.  And over time, that takes its toll on your brakes.  Friction is what stops your vehicle.  Most newer vehicles have disc brakes, and the parts that wear out the fastest are those that rub against each other every time you stop, the rotors and the pads. The rotors are discs that rotate with the wheels, and the pads are removable surfaces that make contact with the rotors to slow or stop your vehicle.  Bits of both wear off each time you stop, and when enough of either (or both) lose too much material, your brakes become unable to safely slow or stop your vehicle.  The pads usually are the parts that wear out first.  Signs that your brakes might be getting worn are: Y ... read more