Wilmot Auto Repair

Ever wonder how your vehicle’s transmission is connected to your wheels? After all, when you hit a pothole or some other uneven part of a road’s surface, there has to be something that can maintain the connection between the transmission and the wheel yet keep everything moving at the same speed.  That very cool device is called a CV joint, a kind of driveshaft running to each wheel.  The CV stands for constant velocity because it keeps the drive wheels moving at a constant speed (velocity).  They’re used mostly on front-wheel drive vehicles but also in rear-wheel and all-wheel drive vehicles. The joints move up and down and adjust to bumpy surfaces.  Plus, they are covered in a rubber boot which protects them from road debris and also holds lubrication in.  There’s a CV joint and boot on the transmission side and one on the wheel side.  Unfortunately, the spot that usually fails first is that rubber protective cover (the boot).&nbs ... read more

If you've ever had a flat tire, then you know welcome it is to have a spare tire that is properly inflated, in good shape and easy to get to.  Problem is many of us don't even give our spare tire (if we even have one) a second thought. If you have an SUV or truck with a spare, it may be mounted outside the vehicle, such as on the tailgate or underneath the vehicle.  All of them, especially those underneath, take the brunt of debris, moisture, salt and dirt from the road surface, a potpourri of corrosion potential.  The hardware that holds these on can rust into a solid mess, making it hard for you or even a roadside assistance service to get off.  If you have one of those, have it checked and maintained at your vehicle repair facility on a regular basis.  They should be lubricated and cleaned periodically, and some recommend doing this service every time you have your tires rotated.  If the spare is the same size as the tires on the vehicle, it may be a go ... read more

A driver brought her vehicle into the shop the other day and told us how she was getting lousy fuel economy and that the engine was running rough.  Plus, the Check Engine light was on.  Our technician checked the code the engine had generated (why the Check Engine light was on) and found the problem.  It was a faulty Mass Air Flow sensor, MAF sensor for short. This MAF sensor is an important part of your vehicle.  What it does is calculate the amount of air going into your engine.  As you may know, air is taken into your engine where it's mixed with fuel.  Then, the spark plugs fire, that explosive fuel/air mixture detonates, and all these sequential explosions together provide the power to get your vehicle moving down the road.  It makes sense that if the MAF sensor isn't sending the engine's computers the correct information on the amount of air going in the engine, the fuel/air mixture isn't going to be right. It will either too rich (too much gaso ... read more

One of the most important things you can do to keep your vehicle running safely is to make sure your tires are properly inflated.  If one or more is vastly over- or underinflated, that has the potential to cause major handling problems and may result in a dangerous accident. All vehicles in recent years are equipped with Tire Pressure Monitoring Systems, or TPMS.  One system uses small sensors in the tires that continually check the pressure in each tire.  That sensor sends a signal to computers in your vehicle which turns on an instrument panel light warning of low pressure when at least one is very low. Or it may update a numeric reading on your instrument panel which gives you an approximation of how many PSI (pounds per square inch) of air is in each tire.  Another system works with your antilock brake system to measure the size of your vehicle’s tires.  When one wheel is going faster than another, it will spin faster. A computer sees that and alerts ... read more

Your vehicle has lots of doors including that one usually near the back on the vehicle's side.  That's the fuel door, something you use every time you gas up.  These endure hundreds of open-and-close cycles, usually without any problems.  But when they act up, it can be a major inconvenience for you. When they stick in the "open" position, it can present real dilemma.  You can still pump your gas, but do you just drive around with that flap sticking out the side? What happens if someone steals the gas cap or it gets damaged? What happens if it rains? Yep, it's decision time. A fuel door that sticks open can be due to a number of factors.  The hinge on the door may have broken, possibly from corrosion or it may have been hit sometime.  Some vehicles have a cable that operates the door and it could be loose.  The latch that holds the door shut could have broken or it, too, could be bent from something hitting it.  You probably want to take care of ... read more

No matter what the weather is like outside, your internal combustion engine expects to keep its cool all the time, even when it's really cold.  That's because engines create the power that moves you to your destination by a series of tiny explosions of a fuel and air mixture. In turn, that generates a lot of heat in a small space. Your vehicle has a complete cooling system with a lot of different parts that work together to keep the temperature at a point where the metal engine parts won't heat up enough to warp.  Its lifeblood is coolant, a liquid that circulates through the engine (and, in most vehicles, the transmission, too) through a series of hoses and tubes.  In order to get rid of the coolant's heat, your vehicle has a part you probably recognize: the radiator.  It does what its name proclaims: radiates heat.  The radiator has a series of thin metal fins that coolant goes through, and when outside air passes over them, the heat is dissipated from the ra ... read more

Some drivers don't pay any attention to their vehicles until something breaks.  Others take them into their service repair facility for maintenance even before a problem develops.  Still, even if you fit into the second group, there are some parts on a vehicle that will simply wear out over time. Your vehicle has gaskets in several places.  They use a flexible material to seal the gaps between metal parts that fit together. After time, that material shrinks or gets brittle and fails.  Eventually, after time, you will have to get gaskets replaced. Same goes for belts.  Your engine has belts that help take the mechanical energy of the engine to drive other parts such as the generator and air conditioner.  Heat and age will eventually cause these belts to wear out or break, so you'll need new ones at some point. You'll also find yourself buying brake pads.  As much as you may try to go easy on them, brake pads work by wearing off a little bit of them eac ... read more

When you're driving and turn a corner, you probably aren't aware of all that's going on with your wheels.  The outside wheels have a longer distance to travel than the inside wheels, so there are gears that allow the wheels to go at different speeds when you turn.  That set of gears is called a differential.  In front-wheel drive vehicles, it's by the transmission and called a transaxle.  Rear-wheel drive vehicles have the differential, naturally, on the rear axle. Many all-wheel and four-wheel drives add a center differential since power has to go to the front and rear wheels. (Some newer vehicles power wheels with electric motors, but that's a whole different story.) Time and distance traveled eventually can take their toll on the differential, and you may notice some noises you hadn't heard when your vehicle was newer.  Sometimes you'll hear a whir that might change in pitch when you turn.  You may hear clicking sounds when you're moving.  Others d ... read more

No one likes to be greeted in the morning by having someone screech at you.  The same goes for a loud, high-pitched noise your vehicle greets you with every time you start the engine.  If you're wondering if that's normal, no, it isn't.  And it is worth getting checked out.  The good news is that it might be nothing serious.  Then again, it may be. The first things to suspect any time you hear a high-pitched sound coming from the engine are belts.  They have tension on them and they're trying to turn lots of different pulleys, pumps and other equipment the engine needs to work properly.  The noise could come from the belts starting to wear out and dry out. If one of those belts breaks at an inopportune time, not only can it strand you somewhere, the damage to the engine could be very expensive to fix. Other things that will cause a high-pitched sound are the pulleys and tensioners.  The tensioners keep the right amount of pressure on the belts an ... read more

Warm weather can bring severe storms, and when the rain is coming down hard, that's one time you really need to be able to see as clearly as possible out your windshield.  Having wiper blades that are fit for the job are important to maintain that safe view. Maybe you live in a climate where you use blades made for winter weather and you have haven't changed them since the weather changed.  Those blades are made of heavier materials and don't work as well in warmer temperatures. Blades made for warm temperatures are lighter and clear water better in the warmer months. The general rule of thumb is you should change your blades every six months, but if you use them a lot, you might have to change them more often.  A couple of signs that your blades need changing? If you are seeing streaks on the glass or hearing a chattering sound when your wipers are working, time for a new pair. Wiper blades have cleaning windshields on vehicles for more than 100 years.  The origina ... read more