Wilmot Auto Repair

If you've ever gotten in an unfamiliar vehicle, maybe a rental car, you may have pulled up to the gas pump and wondered, "Which side is the fuel filler on?" Here's a tip for you.  There is usually a little arrow on the instrument panel near the fuel gauge that points to the side where the fuel filler is.  But why are the fuel fillers not all on the same side, anyway? There are lots of reasons.  At one time, many manufacturers tried putting them in an easy-to-reach spot: in the center of the vehicle's rear end.  Some even hid them behind a hinged license plate door.  Cool place, but it turned out not to be a good idea.  When a vehicle with a fuel filler in the rear was hit by another vehicle from behind, it was much more prone to catch fire and explode. Safety regulations now dictate that the fuel filler doors be placed within crumple zones and away from where they can drip fuel on hot exhaust pipes or near electrical connections.  But why do manufactu ... read more

A technician was telling us the other day that he was servicing an engine and spotted something he'd never seen before: A collection of dry dog food siting on a horizontal metal ledge near the base of the engine.  It was neatly stashed and was in a spot where the food pellets couldn't have simply fallen down in there. Even though it's the first time he'd seen dog food in an engine, he immediately knew what was going on.  Critters like mice or chipmunks had found the dog food somewhere nearby and had used the engine as a nice storage unit.  Mice, squirrels, chipmunks—you name it—like the heat of the engine.  And they'll use that to store up supplies of food for use in cold weather when outside food supplies are scarce.  The problem is they'll also chew on engine components while they're there. And they can do a lot of damage if they start gnawing on the wires.  Depending on how much of your electrical system needs to be replaced, repairs can mou ... read more

Alfred Hitchcock once made a mystery thriller film called "Rear Window." It had nothing to do with the rear window of today's cars, SUVs, CUVs and light trucks.  But there is one thing that some drivers DO find mysterious.  Why don't the rear windows in the second row of many of these vehicles go down all the way? You've probably seen or owned one or two. That rear side window only goes down about a third, a half or three-quarters of the way. Yet there are some similar vehicles where the window goes down all the way.  What gives? There was the rumor going around that the restriction on how far those windows could go down was a child safety feature.  The thought was that if those windows couldn't open up fully, a child (or pet) would be less likely to fall out.  But it turns out the real reason is that the way the rear doors were designed, there was just no room for the window to go down all the way into. Many vehicles are configured so that the rear wheel arch ... read more

Stop! It's one of those things your vehicle has to do consistently and reliably.  That's why brake maintenance is vitally important, worthwhile for you to make sure stays up to date. A brake system has many components. If your vehicle has disc brakes, they have pads that make contact with the rotors (the metal discs).  Those pads usually have a metal back, and the part that presses against the discs is made of a material which provides friction to stop the vehicle. Because of that friction, the pads are expected to wear down and eventually the rotors will, too.  But the pads usually are the part that will need to be replaced more often. But how do you know when it's time? There are several signs, one of which is when your brakes squeak or make a high-pitched sound when you step on the brake pedal.  Many newer vehicles also have sensors on the brake pads.  When the pads get worn down to a certain point, the sensor will tell the vehicle's computer to turn on a li ... read more

Knowing how their engine works can help Wilmot drivers make informed decisions about auto care and prevent repairs to their vehicles. This is especially true when it comes to timing belts.An engine's power is generated in the cylinders. Inside the cylinder is a piston that moves up and down while the engine is running. Power is generated in a cycle that includes four strokes of the piston. First, the piston drops and a valve at the top of the cylinder opens to let in fuel and air. The piston then rises, which compresses the fuel and air. At this point, the spark plug fires, igniting the fuel and pushing the piston down. This downstroke transfers energy to the engine, which provides the power it needs to run. The piston rises again, and a valve opens to release the exhaust.All of this movement is orchestrated by a timing belt. The timing belt is so named because it keeps the pistons and valves operating in synch with each other, just as a conductor keeps all of th ... read more

If someone told you that your vehicle could have the same power but with a smaller engine, wouldn't that sound like great idea? Just think, a smaller engine would save you money at the gas station and you'd still get the same horsepower. The technology to do just that has been around for a long time. It's called a turbocharger. Race cars and other performance vehicles have been using turbochargers for years. It gives them a power boost without the need of a bigger engine, saving them fuel and pit stops. Automakers have offered turbo gasoline and diesel engines for years, but there were problems with durability. Plus drivers had to make some driving adjustments with the way turbos delivered power. Newer turbos, though, have been vastly improved, and manufacturers are including them in more models. For example, Jeep offers its 2019 Cherokee with a choice of two engines that each make about 270 horsepower. One is a 4-cylinder turbocharged engine and the other is a 6-cylinder conventional ... read more

Many Wilmot car owners have probably wondered: "What's the harm in putting off replacing an engine air filter? The answer is that not replacing it could cause your Mass Air Flow (MAF) sensor to fail. This expensive sensor is situated between your engine air filter and your engine. Dirty air filters are a leading cause of mass air flow sensor failure – and these babies can cost several hundred dollars to replace in Wilmot.Change your vehicle air filter at Walker Automotive when it's dirty. Your vehicle engine will thank you.Give us a call. Walker Automotive3 Deerwood DriveWilmot, NH 03287603.526.4848    

Your vehicle has a way of letting you know when something's wrong. Consider a vibrating steering wheel. It certainly didn't do that when it was new, so that shake is trying to tell you something. There are a few things that can cause your steering wheel to vibrate as you drive down the road.  One of the most common is out-of-balance tires.  You may not only feel that wobble in your steering wheel, you might also feel it in the tires.  Sometimes it's not there when you're driving at lower speeds through residential areas, and sometimes it starts when you hit highway speeds.  So what is tire balance anyway?  Well, you have a rubber tire that fits around a metal wheel.  It should have the same weight all the way around.  If it doesn't, it will start getting the shakes.  Ever load your washing machine so that all the clothes are at one side of that drum that spins?  When it hits the spin cycle, it can throw that washer against the wall.  Th ... read more

There are a lot of things in life that Wilmot residents have to do on a regular basis. We wash dishes every day, do our laundry and mow our lawns every week, and pay the bills every month. We should go to our Wilmot dentist twice a year and see our doctor for a check-up once a year. When we don't stay on schedule with these routines, it can lead to embarrassing, painful or expensive consequences. Scheduled maintenance is also part of good vehicle care. Wilmot drivers should take their vehicles in regularly for a good check-up. But many folks struggle to remember — or actually even ignore — this auto advice. When it comes to our vehicles, we're more likely to listen to, “If it ain't broke, don't fix it,” than, “An ounce of prevention is worth a pound of cure.” Yet it is the second adage that is the more applicable one.Regular brushing treatments prevent cavities. Filling a cavity prevents a more painful and ... read more

If you hit a bump in the road and your vehicle just keeps bouncing up and down for a lot longer time than it used to, you may have bad struts and shocks.  They're the things that help to keep your vehicle's wheels and tires planted to the road surface. But they don't last forever.  With care and depending on where and how you drive, shocks and struts should be replaced at intervals ranging from 50,000 miles/80,000 km to 100,000 miles/160,000 km.  If you drive on bumpy roads with a lot of potholes, that interval will likely be shorter. Rough surfaces can take their toll. But how do you know if your shocks and struts are doing their job properly? The best way is to have your vehicle checked by a technician.  He or she can inspect the shock absorbers and struts for leaks, corrosion and damage.  Mounts and bushings can also go bad and they should be evaluated as well.  A thorough examination by a technician will also include looking at other suspension parts ... read more